Vennligst vent...
Produktet ble lagt i handlekurven. Se handlevognen her
Tom handlevogn

APC Automatic Transfer Rack ATS

Forsiden / APC Automatic Transfer Rack ATS
APC Automatic Transfer Rack ATS 32 Amp (AP7724)
APC Automatic Transfer Rack ATS 32 Amp (AP7724)
APC Automatic Transfer Rack ATS 32 Amp (AP7724)
APC Automatic Transfer Rack ATS 32 Amp (AP7724)
APC Automatic Transfer Rack ATS 32 Amp (AP7724)
APC Automatic Transfer Rack ATS 32 Amp (AP7724)

APC Automatic Transfer Rack ATS
32 Amp

  • Type PDU
13 793,-
11 034,40 ekskl. mva
I butikk Ikke på lager Hovedlager Ikke på lager På fjernlager Forventet leveringsdato 03.09.2018

Rack ATS, 2U 230V, 32A, IEC309-32A In, (16)C13, (2)C19 Out

APC Rack-mount Transfer Switches , Input: 200V, 208V, 230V , Input Connections: IEC 309 32A 2P+E , Cord Length: 8 feet ( 2.44 meters ) , Output: 230V , Output Connections: IEC 320 C13,IEC 320 C19


Documentation CD, Rack Mounting brackets, RS-232 configuration cable, Warranty card


  • Nominal Output Voltage 230V
  • Maximum Total Current Draw per Phase 32A
  • Output Connections (16) IEC 320 C13
  • (2) IEC 320 C19
  • Always on Outlets 18
  • Overload Protection Yes


  • Nominal Input Voltage 200V,208V,230V
  • Input Frequency 50/60 Hz
  • Input Connections IEC 309 32A 2P+E
  • Cord Length 2.44 meters
  • Number of Power Cords 2
  • Maximum Line Current per phase 32A
  • Maximum Input Current per phase 32A


  • Net Weight 6.86 KG
  • Maximum Height 88.00 mm
  • Maximum Width 432.00 mm
  • Maximum Depth 236.00 mm
  • Shipping Weight 9.36 KG
  • Shipping Height 184.00 mm
  • Shipping Width 613.00 mm
  • Shipping Depth 356.00 mm


  • Operating Environment -5 - 45 °C
  • Operating Relative Humidity 5 - 95%
  • Operating Elevation 0-3000 meters
  • Storage Temperature -25 - 65 °C
  • Storage Relative Humidity 5 - 95%
  • Storage Elevation 0-15000 meters


  • Regulatory Approvals EN 55022 Class A,FCC Part 15 Class A
  • Standard Warranty 2 years repair or replace
  • Environmental Compliance RoHS 7b Exemption,REACH: Contains No SVHCs,Contains Lithium Battery


The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Features & Benefits


Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.


Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternative power source.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.