Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

APC NetShelter SX 48U Nexus 7018 duct kit

Forsiden APC NetShelter SX 48U Nexus 7018 duct kit
APC NetShelter SX 48U Nexus 7018 duct kit (AR7747)

APC NetShelter SX 48U Nexus 7018 duct kit

Varenr.:
AR7747
EAN:
0731304288008
56 425,-
45 140,- ekskl. mva
Hovedlager Bestillingsvare Butikk Sarpsborg Bestillingsvare Butikk Sørlandssenteret Bestillingsvare Butikk Kristiansand Bestillingsvare Leverandør Forventet leveringsdato 12.04.2024
Beskrivelse

Rack Air Distribution


NetShelter SX 48U Duct Kit for Cisco Nexus® 7018

Air distribution for power dense racks and low pressure areas

Includes

Baying hardware, Foam gasket strips, Installation guide, Mounting Hardware, Side airflow ducts, Side baffles

Physical

Net Weight: 61.00 KG
Maximum Height: 2088.00 mm
Maximum Width: 267.00 mm
Maximum Depth: 1200.00 mm
Shipping Weight: 94.75 KG
Shipping Height: 550.00 mm
Shipping Width: 1530.00 mm
Shipping Depth: 760.00 mm
Rack Height: 48U
Color: Black

Conformance

Standard Warranty: 2 years repair or replace
Environmental Compliance: RoHS,REACH: Contains No SVHCs

Features

Unique design delivers cold air to the intake and isolation of hot and cold aisle ensuring cooler intake temperatures, increasing equipment life.

Increased cable capacity and manageability for high density cable entry/exit from the enclosure.

The Side Airflow Duct Kit for Nexus 7018 and NetShelter® SX 1200-mm Deep Networking Enclosure have been tested and approved by Cisco® for supporting Nexus 7018 datacenter networking switches and APC is listed as an approved vendor in the Nexus 7000 Series Site Preparation Guide.

Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure.

Supports toolless installation of AR8444 fiber spools.

Specifically designed to work with Netshelter Enclosures.

Simplifies future planning by allowing side to side equipment to be placed anywhere in the data center.

Provides proper intake temperatures, increasing equipment life.

Overhead cable troughs and partitions install toollessly on the roof of the enclosure eliminating the need for ceiling mounted or underfloor mounted cable trays. Cable troughs and partitions are designed to manage both power and data cables while maintaining separation.

Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor.

Perforated front and rear doors provide ample ventilation for rack-mount equipment.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.