Power Cord, Locking C19 to L5-20P, 3.0m Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads. Output Nominal Output Voltage 120V Maximum Total Current Draw per Phase 20A Output Connections (1) IEC 320 C19 Cord Length 3.05 meters Input Input Connections NEMA L5-20P Cord Length 3 meters Number of Power Cords 1 Maximum Line Current per phase 20A Maximum Input Current per phase 20A Physical Net Weight 0.72 KG Maximum Height 230.00 mm Maximum Width 230.00 mm Maximum Depth 45.00 mm Shipping Weight 0.72 KG Shipping Height 230.00 mm Shipping Width 230.00 mm Shipping Depth 45.00 mm Color Black Units per Pallet 750.00 Environmental Operating Environment 0 - 105 °C Operating Relative Humidity 20 - 80% Operating Elevation 0-3000 meters Storage Temperature -25 - 105 °C Storage Relative Humidity 20 - 80% Storage Elevation 0-15000 meters Conformance Regulatory Approvals CSA,UL Listed Standard Warranty 2 years repair or replace Environmental Compliance RoHS,REACH: Contains No SVHCs