Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19

Forsiden / APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)
APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19 (AP8653)

APC Rack PDU 2G Sw ZeroU 32A 21/C13 3/C19

Varenr.:
AP8653
EAN:
0731304276982
  • Type Rack / Tilbehør
25 321,-
20 256,80 ekskl. mva
Hovedlager Bestillingsvare Butikk Sarpsborg Bestillingsvare Butikk Sørlandssenteret Bestillingsvare Butikk Kvadraturen Bestillingsvare Leverandør Forventet leveringsdato 03.03.2021
Beskrivelse

Rack PDU 2G, Switched Plus, ZeroU, 32A, 230V, (21) C13 & (3) C19


APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Output

  • Nominal Output Voltage 230V
  • Maximum Total Current Draw per Phase 32A
  • Output Connections (21) IEC 320 C13
  • (3) IEC 320 C19
  • Overload Protection Yes

Input

  • Nominal Input Voltage 200V,208V,230V
  • Input Frequency 50/60 Hz
  • Input Connections IEC 309 32A 2P+E
  • Cord Length 3 meters
  • Number of Power Cords 1
  • Acceptable Input Voltage 220-240 VAC
  • Maximum Line Current per phase 32A
  • Maximum Input Current per phase 32A

Physical

  • Net Weight 8.23 KG
  • Maximum Height 1829.00 mm
  • Maximum Width 56.00 mm
  • Maximum Depth 51.00 mm
  • Shipping Weight 10.50 KG
  • Shipping Height 2038.00 mm
  • Shipping Width 162.00 mm
  • Shipping Depth 118.00 mm
  • Color Black
  • Units per Pallet 42.00

Environmental

  • Operating Environment -5 - 45 °C
  • Operating Relative Humidity 5 - 95%
  • Operating Elevation 0-3000 meters
  • Storage Temperature -25 - 65 °C
  • Storage Relative Humidity 5 - 95%
  • Storage Elevation 0-15000 meters

Conformance

  • Regulatory Approvals EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,VDE
  • Standard Warranty 2 years repair or replace
  • Environmental Compliance RoHS,REACH: Contains No SVHCs,Contains Lithium Battery

Features

Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.

Features & Benefits

Availability

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Agility

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.

Tilbehør

Vis alle
APC APC RACK SIDE AIR DISTRIBUTION 2U RM 230V NS
APC RACK SIDE AIR DISTRIBUTION 2U RM 230V NS
8 676,-
6 940,80  ekskl. mva
APC APC Power Cord Kit 6 ea C19 t C20 1.8m
APC Power Cord Kit 6 ea C19 t C20 1.8m
2 906,-
2 324,80  ekskl. mva
APC APC Pwr Cord Kit Locking C19 to C20 0.6m
APC Pwr Cord Kit Locking C19 to C20 0.6m
1 850,-
1 480,-  ekskl. mva
APC APC Power Cord Locking C19 to C20 3m
APC Power Cord Locking C19 to C20 3m
1 096,-
876,80  ekskl. mva
APC APC Pwr Cord Kit 6 C13 t C14 90 Deg 1.8m
APC Pwr Cord Kit 6 C13 t C14 90 Deg 1.8m
2 003,-
1 602,40  ekskl. mva
APC APC Power Cord Kit 6 ea C13 t C14 1.8m
APC Power Cord Kit 6 ea C13 t C14 1.8m
2 015,-
1 612,-  ekskl. mva
APC APC RACK PDU SWITCHED ZERO U 10A 230V
APC RACK PDU SWITCHED ZERO U 10A 230V
20 440,-
16 352,-  ekskl. mva
APC APC NetBotz-Room-Monitor 355 with 120/ 240V-PoE-Injector
APC NetBotz-Room-Monitor 355 with 120/240V-PoE-Injector
22 248,-
17 798,40  ekskl. mva
APC APC Warranty Ext/1Yr for AC-04 Accessories
APC Warranty Ext/1Yr for AC-04 Accessories
1 724,-
1 379,20  ekskl. mva
APC APC Power Cord Kit C19 t C20 1.2m
APC Power Cord Kit C19 t C20 1.2m
2 398,-
1 918,40  ekskl. mva
APC APC NETSHELTER SX 42U 750MM WIDE X 1070MM DEEP NETWORKING ENCL W/SIDES
APC NETSHELTER SX 42U 750MM WIDE X 1070MM DEEP NETWORKING ENCL W/SIDES
41 821,-
33 456,80  ekskl. mva
APC APC Power Cord Kit 6 ea C19 t C20 1.8m
APC Power Cord Kit 6 ea C19 t C20 1.8m
2 888,-
2 310,40  ekskl. mva
APC APC Smart UPS+PowerChute+/ 750VA LCD RM 2U
APC Smart UPS+PowerChute+/750VA LCD RM 2U
10 307,-
8 245,60  ekskl. mva
APC APC Smart UPS+PowerChute+/ 1000VA LCD RM 2U
APC Smart UPS+PowerChute+/1000VA LCD RM 2U
13 373,-
10 698,40  ekskl. mva
APC APC Smart UPS+PowerChute+/ 1500VA LCD RM 2U
APC Smart UPS+PowerChute+/1500VA LCD RM 2U
20 924,-
16 739,20  ekskl. mva
APC APC SMART-UPS X 3000VA RACK/ TOWER LCD 200-240V                     IN ACCS
APC SMART-UPS X 3000VA RACK/TOWER LCD 200-240V IN ACCS
32 640,-
26 112,-  ekskl. mva
APC APC SMART-UPS X 3000VA RACK/TO NC LCD 200-240V WITH NETWORK CARD   IN ACCS
APC SMART-UPS X 3000VA RACK/TO NC LCD 200-240V WITH NETWORK CARD IN ACCS
42 163,-
33 730,40  ekskl. mva
APC APC SRT 10000VA RM 230V . ACCS
APC SRT 10000VA RM 230V . ACCS
130 071,-
104 056,80  ekskl. mva
APC APC NetShelter SV 42U 600mm Wide x 1060mm
APC NetShelter SV 42U 600mm Wide x 1060mm
18 546,-
14 836,80  ekskl. mva
APC APC NetShelter SV 42U 800mm Wide x 1060mm
APC NetShelter SV 42U 800mm Wide x 1060mm
22 585,-
18 068,-  ekskl. mva