Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er)

Forsiden / APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)
APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er) (AP8981)

APC Switched Rack PDU - Strømfordelingslist ( kan monteres i rack ) - AC 230 V - 24 Utgangskobling(er)

Varenr.:
AP8981
EAN:
731304277187
  • Type PDU
23 676,-
18 940,80 ekskl. mva
Butikk Sarpsborg Bestillingsvare Lager Sarpsborg Bestillingsvare Leverandør Forventet leveringsdato 26.11.2020
Beskrivelse

Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19


APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Output

  • Nominal Output Voltage 208V,230V
  • Maximum Total Current Draw per Phase 16A
  • Output Connections (21) IEC 320 C13
  • (3) IEC 320 C19
  • Overload Protection No

Input

  • Nominal Input Voltage 400V 3PH
  • Input Frequency 50/60 Hz
  • Regulatory Derated Input Current (North America) 16A
  • Input Connections IEC 309 16A 3P+N+PE
  • IEC 309 20A 3P+N+E
  • Cord Length 1.83 meters
  • Number of Power Cords 1
  • Maximum Line Current per phase 20A
  • Maximum Input Current per phase 20A

Physical

  • Net Weight 7.00 KG
  • Maximum Height 1791.00 mm
  • Maximum Width 56.00 mm
  • Maximum Depth 46.00 mm
  • Shipping Weight 8.95 KG
  • Shipping Height 2002.00 mm
  • Shipping Width 165.00 mm
  • Shipping Depth 114.00 mm
  • Color Black

Environmental

  • Operating Environment -5 - 45 °C
  • Operating Relative Humidity 5 - 95%
  • Operating Elevation 0-3000 meters
  • Storage Temperature -25 - 65 °C
  • Storage Relative Humidity 5 - 95%
  • Storage Elevation 0-15000 meters

Conformance

  • Regulatory Approvals cUL Listed,EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,FCC Part 15 Class A,ICES-003,UL Listed,VDE
  • Standard Warranty 2 years repair or replace
  • Environmental Compliance RoHS,REACH: Contains No SVHCs,Contains Lithium Battery

Features & Benefits

Availability

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Agility

Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.

Tilbehør

Vis alle
APC APC Power Cord Kit 6 ea C13 t C14 1.8m
APC Power Cord Kit 6 ea C13 t C14 1.8m
2 046,-
1 636,80  ekskl. mva
APC APC Pwr Cord Kit/6ea/ C19 t C20 1.2m
APC Pwr Cord Kit/6ea/ C19 t C20 1.2m
2 422,-
1 937,60  ekskl. mva
APC APC NetShelter SX 48U 600mm Wide x 1070mm Deep Enclosure with Sides Black
APC NetShelter SX 48U 600mm Wide x 1070mm Deep Enclosure with Sides Black
31 167,-
24 933,60  ekskl. mva
APC APC Temperature & Humidity Sensor AP9335TH
APC Temperature & Humidity Sensor AP9335TH
2 202,-
1 761,60  ekskl. mva
APC APC NetShelter SV 42U 600mm Wide x 1060mm
APC NetShelter SV 42U 600mm Wide x 1060mm
14 303,-
11 442,40  ekskl. mva
APC APC Netshelter SV 48U 600x1060 w sides
APC Netshelter SV 48U 600x1060 w sides
22 453,-
17 962,40  ekskl. mva
APC APC NetShelter SV 48U 800mm Wide x 1060mm
APC NetShelter SV 48U 800mm Wide x 1060mm
27 772,-
22 217,60  ekskl. mva
APC APC NetShelter SV 42U 800mm Wide x 1200mm
APC NetShelter SV 42U 800mm Wide x 1200mm
31 105,-
24 884,-  ekskl. mva
APC APC NetShelter SX Deep Enclosure,  42U, 600mm wide X 1070mm deep
APC NetShelter SX Deep Enclosure, 42U, 600mm wide X 1070mm deep
13 125,-
10 500,-  ekskl. mva
APC APC NETSHELTER SX 48U 750MM WIDE X 1070MM DEEP ENCLOSURE W SIDES BLACK
APC NETSHELTER SX 48U 750MM WIDE X 1070MM DEEP ENCLOSURE W SIDES BLACK
36 471,-
29 176,80  ekskl. mva
APC APC NetShelter SX 42U 750mm Wide x 1200mm Deep Networking Enclosure with Sides
APC NetShelter SX 42U 750mm Wide x 1200mm Deep Networking Enclosure with Sides
45 683,-
36 546,40  ekskl. mva
APC APC NetShelter SV 42U 600mm Wide x 1060mm
APC NetShelter SV 42U 600mm Wide x 1060mm
18 979,-
15 183,20  ekskl. mva
APC APC NetShelter SV 42U 600mm Wide x 1060mm
APC NetShelter SV 42U 600mm Wide x 1060mm
17 559,-
14 047,20  ekskl. mva
APC APC NetShelter SV 42U 800mm Wide x 1060mm
APC NetShelter SV 42U 800mm Wide x 1060mm
23 171,-
18 536,80  ekskl. mva
APC APC NetShelter SV 42U 600mm Wide x 1200mm
APC NetShelter SV 42U 600mm Wide x 1200mm
24 476,-
19 580,80  ekskl. mva
APC APC NetShelter SV 48U 600mm Wide x 1200mm
APC NetShelter SV 48U 600mm Wide x 1200mm
29 454,-
23 563,20  ekskl. mva
APC APC NetShelter SV 48U 800mm Wide x 1200mm
APC NetShelter SV 48U 800mm Wide x 1200mm
36 189,-
28 951,20  ekskl. mva
APC APC NetShelter SX Deep Enclosure,  42U, 750mm wide X 1070mm deep
APC NetShelter SX Deep Enclosure, 42U, 750mm wide X 1070mm deep
31 167,-
24 933,60  ekskl. mva
APC APC NETSHELTER SX 42U 750MM WIDE X 1200MM DEEP ENCLOSURE
APC NETSHELTER SX 42U 750MM WIDE X 1200MM DEEP ENCLOSURE
42 222,-
33 777,60  ekskl. mva
APC APC NETSHELTER SX 42U 750MM WIDE X 1070MM DEEP NETWORKING ENCL W/SIDES
APC NETSHELTER SX 42U 750MM WIDE X 1070MM DEEP NETWORKING ENCL W/SIDES
42 982,-
34 385,60  ekskl. mva