APC SYMMETRA PX 48KW ALL-IN-ONE FRAME 400V
Forsiden
/
APC SYMMETRA PX 48KW ALL-IN-ONE FRAME 400V
|
|
APC SYMMETRA PX 48KW ALL-IN-ONE FRAME 400V
-
Kapasitet
48kVA
-
Produkt
Ekstern UPS
302 160,-
241 728,- ekskl. mva
Hovedlager
Bestillingsvare
Butikk Sarpsborg
Bestillingsvare
Butikk Sørlandssenteret
Bestillingsvare
Butikk Kvadraturen
Bestillingsvare
Leverandør
Forventet leveringsdato
16.08.2021
|
Beskrivelse
Spesifikasjoner
Produktomtaler
APC Symmetra PX 48kW All-In-One Frame, 400V
SYCF48KH
Modular, high-efficiency 3-phase UPS that is scalable as your data center grows up to 160kW/160kVA. Suitable for small, medium & large data center applications.
Includes: Installation guide
Features
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick upgrades later.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Multiple cable-entry points
Provides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
Symmetra PX Features & Benefits
Configurable for N+1 internal redundancy
Provides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Hot-swappable power modules
Ensures clean, uninterrupted power to protected equipment during Power Module replacement.
Hot-swappable intelligence modules
Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Network manageable
Provides remote management of the UPS over the network.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick upgrades later.
Scalable runtime
Allows additional run time to be quickly added as needed.
Front-access servicing
Simplifies installation and maintenance while minimizing space requirements.
Programmable frequency
Ensures compatibility with different input frequencies.
SmartSlot
Customize UPS capabilities with management cards.
Battery replacement without tools
Allows quick, easy battery replacement.
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator Compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageable external batteries
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Intelligent Battery Management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure® Manager.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
LED status indicators
Quickly understand unit and power status with visual indicators.
Audible Alarms
Provides notification of changing utility power and UPS conditions.
General
Bypass Connection
5 wire (3PH + N + G)
Bypass Voltage Tolerance
+/-10% settable from +/-4/6/8 and 10%
Max Bypass Input Current
80A
Bypass Protection Device
80A
Output
Output Power Capacity
48 kW / 48 kVA
Max Configurable Power
48 kW / 48 kVA
Nominal Output Voltage
400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
95.00%
Output Voltage Distortion
Less than 2%
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Output Connections
| (1) Hard Wire 5-wire (3PH + N + G) |
|
Output Voltage Tolerance
+/-1% static and +/- 5% at 100% load step
Efficiency at Half Load
95%
Required Output Current Protection
100A
Bypass
Built-in Static Bypass
Input
Nominal Input Voltage
400V 3PH
Input Frequency
40 - 70 Hz
Input Connections
| Hard Wire 5-wire (3PH + N + G) |
|
Input voltage range for main operations
340 - 477V
Other Input Voltages
380,400,415
Input Breaker Capacity
100A
Input Total Harmonic Distortion
Less than 5% for full load
Type of Input Protection Required
gL fuse
Communications & Management
Available SmartSlot™ Interface Quantity
2
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Yes
Physical
Maximum Height
1991.00 mm
Shipping Weight
331.00 KG
Shipping Height
2140.00 mm
Shipping Depth
1210.00 mm
Environmental
Operating Environment
0 - 40 °C
Operating Relative Humidity
0 - 95%
Operating Elevation
0-999.9 meters
Storage Temperature
-15 - 40 °C
Storage Relative Humidity
0 - 95%
Storage Elevation
0-4500 meters
Audible noise at 1 meter from surface of unit
0.00 dBA
Conformance
Regulatory Approvals
EN 50091-1,EN/IEC 62040-3,EN/IEC 62040-1-1,FCC Part 15 Class A,VFI-SS-111
Standard Warranty
1 year repair or replace
Egenskaper |
|---|
| UPS topologi | Dobbeltkonvertering (Online) |
| Output strømkapasitet (VA) | 48000 VA |
| Utgangseffekt | 48000 W |
| Bølgeform | Sinus |
| Inngangsspenning (maks.) | 400 V |
| Inngangsfrekvens | 40/70 Hz |
| Utgangsspenning (min.) | 230 V |
| Utgangsspenning (maks.) | 400 V |
| Utgangsfrekvens | 50/60 Hz |
| Strøm (maks.) | 98 A |
| Antall inngangsfaser | 3 |
| Antall utgangsfaser | 3 |
| Trefasers inngangsspenning støttes | 380,400,415 V |
| Trefasers utgangsspenning støttes | 380,400,415 V |
| Utgangsspenning total harmonisk forvrengning (THD) | 2% |
| Støynivå | 61 dB |
Tilkoblingsevne |
|---|
| Serielt grensesnitt | |
| Seriell grensesnittype | RS-232 |
| Kommunikasjonsserieporter | 2 |
Battery |
|---|
| Batteriteknologi | Forseglet blysyre (VRLA) |
| Batterikapasitet | 13824 VAh |
| Antall støttede batterier | 4 |
| Batteriladetid | 3 timer |
| Hot-swap-batterier | |
Design |
|---|
| Formfaktor | Tower |
| Produktfarge | Svart, Grå |
| ISV-sertifiseringer | EN 50091-1, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, Eurobat General Purpose, ISO 14001, ISO 9001, VFI-SS-111 |
Miljømessige forhold |
|---|
| Driftstemperaturområde | 0 - 40 °C |
| Oppbevaringstemperaturomåde (Celsius) | -15 - 40 °C |
| Luftfuktighetsområde ved drift | 0 - 95% |
| Lagringsrelativ fuktighet | 0 - 95% |
| Driftshøyde | 0 - 999,9 m |
| Høyde når uvirksom | 0 - 15000 m |
Vekt og dimensjoner |
|---|
| Bredde | 600 mm |
| Dybde | 1070 mm |
| Høyde | 1991 mm |
| Vekt | 796 kg |
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.